Beretta A400 Extreme question
So I recently purchased and A400 extreme from Bass Pro(new in box). Got it home and put it together. When I closed the action the barrel pushed away from the receiver about a 1/4 of an inch(shiny metal of the barrel visible). I could push the barrel back into the receiver by hand after the action was closed. I took it back to Bass Pro the next day to ask them if this was normal because I've never seen a shotgun do that. They told me it wasn't normal but Beretta told them they allow an 1/8 of an inch of play. Is this normal? Does Beretta actually allow an 1/8 inch of slop in a $2,000 shotgun?
I would say definitely say not normal. Are you sure your fore-end cap is on all the way? I have several A400's and none of them do this to where the barrel pushes away so that you see the shiny metal. That is pretty alarming on all levels.
I am sure the fore end cap was tight. The 20 gauge i got has the thread on cap with the detent pin and it was as tight as I could get it. Even the "Gunsmith" at Bass Pro put it together and got the same result. I did send it back for factory warranty but ove never seen a barrel push away from the receiver at all. Is pushing away from the receiver normal on Berettas? My old Stoeger and my son's Retay have no play or movement at all
Nicholas Fleming That doesn't seem right. If it is assembled correctly, there should be little to no movement. I would have someone else look at it to confirm you are not missing anything, then send it to Beretta.
Well, like I said, I did send it in for factory warranty so I will update this when I hear something.
Nicholas Fleming Glad you sent it back. That is definitely not safe, nor is it right. And to answer your question of is it normal for Berettas to do this... NOT AT ALL. Again, I have several A400's (multiple gauges) and not one of them do this. Not even a little play. I hope Beretta sends you back with something functioning (perhaps a new gun).
I only asked if it was normal because the "Gunsmith" at Bass Pro said he talked to Beretta and they said they allowed for and 1/8 inch of play from the factory. Whether or not he was telling me the truth or if there was some confusion I'm not sure but it definitely didnt seem normal to me for a gun to allow that much movement
Nicholas Fleming - Well I am definitely glad you questioned it and sent it back to Beretta. It sure is an amazing shotgun and I hope when you get yours back, you'll enjoy it as much as I enjoy mine. And that is pretty weird. I have reached Beretta USA customer service and they get back to you pretty quickly. Hopefully, your experience with them isn't too much of a headache.
I got my A400 back from Beretta and it now has absolutely zero barrel movement when closing the action. However, there response on what they did to "fix" it doesn't add up. They said the replaced the o-ring in the fore end with an upgraded o-ring. Thats it. However, I dont understand how an 1/16 inch thick o-ring eliminated almost 1/4 inch of barrel movement. Im guessing there was another problem that Beretta isn't quite being 100% honest about. Irregardless, they fixed it under factory warranty.